Resin bound surfacing at new build home
The property owner employed BPR Architects to design Downley House as his family home. Downley House was built on the site of old farm buildings set within the newly formed South Downs National Park. Part of the original house has been retained as a folly adjacent to the main house. The building incorporates a family wing and a guest wing linked by a barrel vaulted dining hall over the entrance to the original property, the barrel vaulted roof is just one of a number of barrel themes to be seen in the design, partly a reference to the owner’s history in the wine business. Other interesting features are a copper roof and glass surround spiral staircase leading to a roof terrace. Work began on the development in the summer of 2010 and the project finally reached completion in spring 2012.
Ronacrete Approved Contractor PRC Landscapes was employed to carry out groundworks and landscaping on the 3 acre site, including application of RonaDeck Resin Bound Surfacing
Resin bound surfacing at Downley House, Hampshire
The SuDS compliant two-part aggregate system was applied to 650 square metres of a suitable macadam substrate including patios, the driveway and turning circle. The aggregate selected was Harvest Crunch, a blend of naturally coloured aggregates in keeping with the house surroundings. The aggregate colour will not change over time because the elastic polyurethane resin does not degrade when exposed to Ultra Violet light.
The RonaDeck Resin Bound Surfacing System was supplied in two components which were mixed together with a drill and paddle before being added to the aggregate blend. The aggregate and resin were then mixed in a high capacity forced action mixer. The mixed material was poured onto the substrate, spread to level and trowel finished at a thickness of 15mm. After completion the paving was ready for foot traffic within four hours and ready for vehicles after 1-2 days.
Posted in Resin, Resin Bonded Surfacing, Resin Bound Surfacing
- Tagged .driveway, decorative aggregate, decorative bonded surfacing, decorative bound surfacing, driveway surfacing, Hampshire, new home, pathway surfacing, paving altenative, porous decorative aggregate, resin bound, resin bound aggregate, resin bound gravel, self build
RonaDeck Resin Bound Surfacing on Whitstable driveway
Resin Solutions Ltd, (Kent) was approached by the skipper of a fishing trawler in Whitstable who was having problems with his macadam driveway.
The drive was on a fairly steep slope and this combined with the lack of slip resistance provided by the macadam meant that vehicles could not get off the drive in icy conditions. As the driveway owner needed to be able to get to work in all weathers he needed to find a surface that would provide sufficient grip for vehicles to pass at sub zero temperatures. Another problem encountered was that the macadam was becoming uneven in places and breaking away from the surface, causing stones to get trodden into the house.
Resin Solutions Ltd discussed various surfacing options with the client and a decision was made to use RonaDeck Resin Bound Surfacing. It was chosen for its long life expectancy and because it could be used to level off minor surface irregularities in the macadam.
The clients wanted the driveway to incorporate a clearly defined pedestrian area as they had young grandchildren. Resin Solutions Ltd discussed various aggregate combinations that would provide a contrast and advised that a 1m wide border should be included at the perimeter to provide a pedestrian walkway.
The Midnight aggregate blend was selected for the vehicle areas and Terracotta was chosen for the walkway; a steel trim was installed by Resin Solutions Ltd to provide a well defined separation between the walkway and the drive. The work on the 237 square metres of driveway including all preparation was completed within two days.
“The client is ‘over the moon’ with his new drive and people have shown a lot of interest in the new surface. He is especially pleased that even with last winter’s snow and ice he had no problem getting out of the drive.”
Alan Brough, Resin Solutions Ltd (Kent)