RonaDeck Tree Pit System enhances building project at Middlesbrough School

Tree pit system at Middlesbrough School

Porous tree pit at Middlesbrough school

Ronacrete Approved Contractor Route One Highways laid over 200 square metres of RonaDeck Tree Pit System at Beverley and Tollesby School, Middlesbrough.

The landscaping work was part of a large new school building project combining two special schools in the area which provide education for students with autism and behavioural needs.

The new trees planted at the school are relatively small, but will grow and develop over the years and will provide pupils of the future with a green pleasant environment in which to learn.

The RonaDeck Tree Pit System protects the trees from damage without inhibiting their growth. The tree pit system surrounds the tree in a solid but porous construction which allows the passage of water to the tree roots and keeps the tree nourished and healthy. Ideal for use in public areas such as school playgrounds, streets, car parks and other areas where tree are enclosed by hard landscaping, it is easy to keep clean and so prevents the build up of hazardous and unsightly litter which often accumulates in tree pits, particularly the recesses of metal grilles.

Westward Ho! for Resin Bound

Resin bound at Westward Ho!

RonaDeck Resin Bound Surfacing at Westward Ho!

Ronacrete Approved Contractor Avalon Surfacing has transformed the promenade and village green footpaths at Westward Ho! seafront by laying RonaDeck Resin Bound Surfacing, part of a refurbishment project by Torridge District Council.

The promenade was surfaced by Avalon Surfacing using RonaDeck Resin Bound Surfacing by Ronacrete, who created two unique aggregate blends for the project. A golden aggregate blend covering 636 square metres and a further 668 square metres of a yellow aggregate blend was laid to the village green footpaths.

When Avalon Surfacing were approached by Torridge District Council for samples of aggregate mixes and costings for the project, Avalon Surfacing turned to Ronacrete for assistance and were able to respond quickly with suitable colour suggestions and a favourable pricing structure.

The brief from the council was to give ‘a modern new finish to the promenade and footpaths to replace the tired grey tarmac that had been there for many years’

The gold and yellow combination gives a warm glow to the area even in the dullest of summer weather a .colourful contrast to the red pirate ship in the children’s play area!

“Ronacrete responded quickly providing us with samples of unique colour blends to match the councils requirements and the competiive pricing ensured we won the contract.” – Chris Masters, Avalon Surfacing

The RonaDeck Resin Bound Surfacing system is supplied as a two component UV stable polyurethane resin together with a blend of kiln-dried aggregates for on-site mixing in a forced action mixer. The two resin components were mixed by Avalon with a drill and paddle before being added to the coloured aggregate in a high capacity forced action mixer. As soon as the aggregate was fully coated with resin, the mixed material was discharged from the mixer and trowel applied at a thickness of 12mm onto the prepared surface. The finished system was ready for foot traffic within four hours of being laid.

RonaDeck Resin Bound Surfacing is a resin and aggregate mix which creates a hard wearing alternative to traditional paving and comes with a 15 year guarantee when laid by a Ronacrete Approved Contractor such as Avalon Surfacing. The resin is UV resistant so it will not darken or ‘yellow’ when exposed to sunlight, ensuring that the natural colour of the aggregate does not alter as the surfacing ages. The surfacing is also SuDS compliant, as it has a porous structure which prevents surface ponding of rainwater and will allow water to drain naturally when part of a SuDS* compliant construction.

The aggregate provides slip-resistance, while the elasticity of the resin creates a ‘give’ to the surface, meaning that holiday makers and local residents in Westward Ho! can have a safe and comfortable walking experience which is also pleasing to the eye.

* Sustainable Drainage Systems

 

Pirate ship is resin bound at Westward Ho!

Sesame Gold path ready for Diamond celebration

The Queen’s Silver Jubilee was marked with the creation of the Jubilee Walkway, an integral part of which was the introduction of pedestrian access along the south bank of the Thames, known as Queen’s Walk.

As part of preparations for the Diamond Jubilee thirty five years later Lambeth Council made the decision to have the area ‘smartened up’. Part of this operation was to replace the worn resin bound surfacing on the Queen’s Walk between Waterloo and Blackfriars bridges. The surfacing needed to be laid in time for the Jubilee celebrations which would attract many tourists, particularly for the Jubilee Pageant when crowds would line the banks of the Thames watching over 1,000 vessels participate in a flotilla from Battersea to Tower Bridge..

FM Conway were contracted to lay new resin bound surfacing to 2700 square metres of the 5 metre wide pathway and Sesame Gold aggregate was selected to brighten up the route.

The RonaDeck Resin Bound Surfacing System was supplied as a two-component UV stable polyurethane resin, the two components were mixed with a slow speed drill and paddle before being added to a large forced action mixer containing the Sesame Gold aggregate blend. FM Conway spread the RonaDeck Resin Bound Surfacing to level and smoothed the surface with a steel float. The finished surface was ready for foot traffic within four hours.

Ronadeck Resin Bound Surfacing satisfies SuDS requirements, allowing rainwater to quickly and easily drain through the porous surface, avoiding puddling. Slip testing shows risk of slip to be generally low, an important consideration for a busy walkway.

The resin bound surfacing was completed in time for the crowds to watch the Jubilee Pageant. Now the ‘golden path’ provides a route which takes tourists and commuters past many well known buildings and locations in the capital city. Starting at Waterloo Bridge it runs past the National Film Theatre and the National Theatre through Gabriel’s Wharf, past the IBM building and London Television Centre alongside Bernie Spain Gardens and through Oxo Tower Wharf passing the art-deco Oxo Tower and Sea Containers House, finishing at Blackfriars Bridge close to the Tate Modern.

Resin bound surfacing

‘Golden’ pathway ready for Diamond celebration

Resin bound surfacing near The Oxo Tower, Thames Embankment

RonaDeck Resin Bound Surfacing, Queen’s Walk, London

RonaDeck Resin Bound Surfacing chosen for unique property

Resin bound surfacing at new build home

The property owner employed BPR Architects to design Downley House as his family home. Downley House was built on the site of old farm buildings set within the newly formed South Downs National Park. Part of the original house has been retained as a folly adjacent to the main house. The building incorporates a family wing and a guest wing linked by a barrel vaulted dining hall over the entrance to the original property, the barrel vaulted roof is just one of a number of barrel themes to be seen in the design, partly a reference to the owner’s history in the wine business. Other interesting features are a copper roof and glass surround spiral staircase leading to a roof terrace. Work began on the development in the summer of 2010 and the project finally reached completion in spring 2012.

Ronacrete Approved Contractor PRC Landscapes was employed to carry out groundworks and landscaping on the 3 acre site, including application of RonaDeck Resin Bound Surfacing

Resin bound surfacing at Downley House, Hampshire

.

The SuDS compliant two-part aggregate system was applied to 650 square metres of a suitable macadam substrate including patios, the driveway and turning circle. The aggregate selected was Harvest Crunch, a blend of naturally coloured aggregates in keeping with the house surroundings. The aggregate colour will not change over time because the elastic polyurethane resin does not degrade when exposed to Ultra Violet light.

The RonaDeck Resin Bound Surfacing System was supplied in two components which were mixed together with a drill and paddle before being added to the aggregate blend. The aggregate and resin were then mixed in a high capacity forced action mixer. The mixed material was poured onto the substrate, spread to level and trowel finished at a thickness of 15mm. After completion the paving was ready for foot traffic within four hours and ready for vehicles after 1-2 days.

RonaDeck Resin Bound Surfacing – ends an uphill struggle in Whitstable

RonaDeck Resin Bound Sufacing

RonaDeck Resin Bound Surfacing on Whitstable driveway

Resin Solutions Ltd, (Kent) was approached by the skipper of a fishing trawler in Whitstable who was having problems with his macadam driveway.

The drive was on a fairly steep slope and this combined with the lack of slip resistance provided by the macadam meant that vehicles could not get off the drive in icy conditions. As the driveway owner needed to be able to get to work in all weathers he needed to find a surface that would provide sufficient grip for vehicles to pass at sub zero temperatures. Another problem encountered was that the macadam was becoming uneven in places and breaking away from the surface, causing stones to get trodden into the house.

Resin Solutions Ltd discussed various surfacing options with the client and a decision was made to use RonaDeck Resin Bound Surfacing. It was chosen for its long life expectancy and because it could be used to level off minor surface irregularities in the macadam.

The clients wanted the driveway to incorporate a clearly defined pedestrian area as they had young grandchildren. Resin Solutions Ltd discussed various aggregate combinations that would provide a contrast and advised that a 1m wide border should be included at the perimeter to provide a pedestrian walkway.

The Midnight aggregate blend was selected for the vehicle areas and Terracotta was chosen for the walkway; a steel trim was installed by Resin Solutions Ltd to provide a well defined separation between the walkway and the drive. The work on the 237 square metres of driveway including all preparation was completed within two days.

“The client is ‘over the moon’ with his new drive and people have shown a lot of interest in the new surface. He is especially pleased that even with last winter’s snow and ice he had no problem getting out of the drive.”
Alan Brough, Resin Solutions Ltd (Kent)

http://www.ronacrete.co.uk
tech@ronacrete.co.uk
01279 638700

Resin Solutions
alan@resin-solutions.co.uk
01795 591550/660

RonaDeck Resin Bound Surfacing

Resin bound surfacing at eco-friendly house

SuDS compliant resin bound surfacing surrounds eco-friendly house

RonaDeck Resin Bound Surfacing

A property within a development of quality eco-homes in Cuffley, Hertfordshire has extended its green credentials by having SuDS compliant RonaDeck Resin Bound Surfacing laid to the front driveway and  to paths on either side of the ‘high spec’ residence.

Ronacrete Approved Contractors ARC Surfacing laid approximately 200 square metres of RonaDeck Resin Bound Surfacing, using a 6mm Maple Harvest aggregate which was chosen from the RonaDeck range of natural aggregate blends, each formulated for strength and appearance. The surfacing will not discolour over time because the specially formulated polyurethane resin does not yellow or darken when exposed to Ultra Violet light.

To create a firm foundation for the resin bound paving ARC Surfacing first laid a sound base of asphalt  After allowing this time to harden they mixed the RonaDeck Resin Bound Surfacing two-component resin together with the supplied blended kiln-dried aggregate and laid it by trowel at 18mm thick.

Within just four hours the surface was hard enough to walk on and was ready for cars after 1-2 days.

RonaDeck Resin Bound Surfacing complies with SuDS* regulations which requires that rain water can pass through the aggregate and resin surface into the earth below, allowing it to flow into natural water courses or ground drainage systems. Its porous design ensures water can quickly and easily permeate the surface and allow homeowners to do their part to protect the environment.

RonaDeck Tree Pit protects life enhancing Hackney trees

RonaDeck Tree Pit Surround

Tree Pit

London is and always has been a tree lined city. Some of the benefits are obvious, trees are beautiful to look at – marking the seasons with blossom, seeds and changing leaf colours, they provide homes to a variety of wildlife and on a more practical level create shade and shelter.

Trees have invisible benefits too; absorbing carbon dioxide from the atmosphere as part of the photosynthesis process which allows them to grow. This removal of CO2 from the atmosphere trees can reduce the effects of pollution by cleaning the air and reducing temperatures. Large leaf canopies catch rainfall and slow down the water’s progress from sky to the ground, helping to reduce flash flooding.

Trees also release oxygen into the atmosphere and their leaves catch dust and pollutants in the air preventing them from spreading further, they reduce smog formation, radiant energy from the sun is absorbed or deflected by leaves, this combination of factors reduces the incidence of asthma, skin cancer and stress-related illness.

Trees can even reduce crime! The presence of trees creates a more pleasant environment that people want to go out and enjoy. Simply having more people around to potentially discover and report crime and this deters criminal activity.

Many London Boroughs have embraced the need to preserve existing trees, replace diseased and dead trees and plant new trees, but planting and maintaining trees in an urban environment is not without problems.

A tree’s root system obviously needs access to water in order for the tree to survive, the roots also need to be able to move as they grow. However a natural earth setting is not possible in a pedestrianised street as it can get very muddy, slippery and be hard to keep leaf and litter free and trees are at risk of root damage or being uprooted entirely. Traditional tree grilles provide irrigation and protection for the tree roots but they are difficult to keep clean as litter, dog waste, cigarette stubs and even hypodermic needles get deposited or trapped between the bars.

The London Borough of Hackney asked Civil Engineering Contractor Volker Fitzpatrick to solve the problem of protecting the roots of the many trees which enhance the streets of Hackney, situated on the doorstep of the Olympic site.

 RonaDeck Tree Pit System from Ronacrete was recommended for its SuDS compliance, ease of maintenance, flexibility and for the appearance of the resin bound gravel.

RonaDeck Tree Pit System is a natural aggregate finish surround for planted trees in public and private areas. RonaDeck Tree Pit System surrounds the tree in a solid yet flexible construction that is easily swept clean and has a porous structure that allows rainwater to seep immediately through to the root system and reduces the burden on surface water drainage.

Sub contractor AJ O’Connor purchased the RonaDeck Tree Pit System through specialist construction industry distributor WT Burdens and gradually the system has been applied over a large area.

AJ O’Connor excavated around each tree to a depth of 150-200mm and filled the excavation with gravel to within 50 mm – 75 mm of the surface, the required depth of RonaDeck Tree Pit System, depending on expected traffic. The two-part resin was mixed with a drill and paddle before being added to the kiln-dried aggregate component in a high capacity forced action mixer. The mixture was then laid on the prepared gravel base and levelled off; allowing a curing time of four hours for foot traffic and one day for vehicles.

 

National Museum for Wales

National Museum of Wales

Resin bonded surfacing at the National Museum for Wales

Ronadeck Resin Bonded Surfacing has been laid onto external pathways and communal areas within the landscaped gardens and grounds of the National Waterfront Museum in Swansea. The museum, which opened in the summer of 2005, tells the story ofWales’ industrial and maritime heritage.

The building and landscaping was designed by Wilkinson Eyre Architects, and features over 7,000 m2 of interconnecting external pathways. The pathways needed to be slip resistant in all weathers with an attractive surface that complemented the overall design. Ronadeck Resin Bonded Surfacing is a hardwearing, natural surfacing system that offers excellent slip-resistance. It is also strong enough to take the museum’s regular vehicular service traffic. Ronadeck Resin Bonded Surfacing Winter Grade can also be applied in cold, damp conditions, an advantage on this project which was completed during the wet winter months.

Ronadeck Resin Bonded Scratch Coat was applied to regulate the surface of the substrate, before application of Ronadeck Resin Bonded Surfacing Buff Resin. Chinese Bauxite aggregate was immediately cast into the rapid curing resin, to ensure full penetration into the resin and left to cure for two hours. After being swept, the paths were ready for immediate use.

Ronadeck Resin Bonded Surfacing is a slip-resistant, durable, fast curing surfacing available in a variety of colours. It has been successfully used for a wide variety of paving applications including the walkways from car park to the terminal atStanstedAirport, highways, concourses, footbridges, pathways, driveways, car parks, balconies and terraces, boardwalks, jetties, ramps and steps.  The ideal substrate for Ronadeck Resin Bonded Surfacing is concrete but flexible pavement is frequently treated.  Hardwood and steel, mostly for boardwalks, jetties and footbridges have also been successfully made slip resistant with Ronadeck Resin Bonded Surfacing.

6 Nations Rugby fans to walk on RonaDeck Resin Bound Surfacing

‘Twickers’ gives it a try

Twickenham Stadium, the largest rugby union stadium in the United Kingdom, was recently enlarged to seat 82,000 making it the second largest UKstadium, second only to Wembley.
 
‘Twickers’ is home to Rugby Football Union and therefore a primary venue for rugby union including the 6 Nations Championship. The stadium is considered an icon of English rugby and hosts other major concert events such as The Rolling Stones, Genesis, U2 and Eagles.
 
Recently the tarmac paving outside the stadium was renewed and paths and walkways were applied on top of the new tarmac.
 
Ronacrete’s RonaDeck Resin Bound Surfacing System was applied at a thickness of 15mm by contractors F M Conway Ltd to create decorative, slip-resistant pavements for the sports, music and other fans who use the stadium’s facilities every week.

RonaDeck Resin Bound Surfacing System was supplied in easy to use packaging comprising a two-component polyurethane resin together with aggregates for easy on-site mixing in a forced action mixer. The two component non-yellowing resin was mixed with a drill and paddle mixer and added to the dry aggregate, mixed and then laid onto the prepared surface.

Four hours until footsteps

Within just four hours the new surface was ready for the feet of the famous and of their many fans. 

Importantly it satisfies the SuDS regulations allowing rainwater to quickly and easily drain through the permeable surface, is slip resistant and is quick and easy to lay.

RonaDeck Resin Bound Surfacing

Resin bound decorative porous stone surfacing 

Benefits

  • Attractive natural aggregate appearance
  • Highly porous allowing water to drain
  • UV stable non yellowing resin  

Uses

  • Decorative natural aggregate surfacing
  • Footpaths, walkways, corridors, cycle paths
  • Playgrounds, pool and pond surrounds

    Resin bound surfacing on paths at Twickenham

    Resin bound at Twickenham London